- Journal Bearing Turbo
- Direct Drop-in Design
- Light Weight Billet Comp Wheel
- Capable of 345 HP!
-
The RV6 R365 Black Turbo is a journal bearing turbo with the power curve and boost characteristics of a ball bearing GTX2860 GEN 2, while maintaining the resilience of a journal bearing turbo. Oversized journal and thrust bearings are used to give durability under high loads. An inconel turbo wheel cuts down weight and reduces fatigue from high temperatures. On a test vehicle, the result was 345whp @ 27.5psi on E30 before the MAP sensor and fuel system were maxed out.?
RV6 tested several turbine and compressor wheels and found this setup to be optimal. It can max out the factory fuel system before running into compressor surge/choke, often causing excess vibration and premature failures.
This turbo will require thicker 0W-30 or 5W-30 oil. The reason is that running increased boost pressures on a small frame turbocharger puts significant load on the thrust bearing. The thicker oil will offer better production to the turbo and engine at this boost level.
This is the latest update to the R365 Series Turbo. It features a new compressor and turbine wheel for faster spool and more top end power.?
Note: Professional installation recommended. Custom tuning required.
Features
- Direct drop in design
- Optimized housings made from scratch??
- Oversized journal bearing
- Oversized thrust bearing for high loads
- Light weight billet compressor wheel
- Inconel Alloy Turbine wheel
- Optimized FEA analysis design
- 2016‐2021 Honda Civic 1.5T
2017‐2021 Honda Civic Si??
- Compressor
Inducer – 50.38mmExducer – 68mmBlades – 5+5TurbineInducer 47mmExducer 41.4mmBlades – 9A/R 0.5??
- 1 x R365 Black Turbocharger??
1 x Inlet Gasket1 x Outlet Gasket1 x Oil Feed Adapter??1 x Preassembled Oil Feed Line with Banjo Adapter1 x Upper Coolant Banjo Adapter1 x Lower Coolant Banjo Adapter2 x M12 Coolant Banjo Bolt1 x M10 Oil Banjo Bolt (1.0MM)4 x M12 Copper Washer2 x M10 Copper Washer2 x M10 x 1.25 x 30mm Flange bolts??2 x M10 x 1.25 x 42mm Studs2 x M10 x 1.25 Flange Nuts1 x M8 x 1.25 x 48mm Studs1 x Oil Strainer O-Ring??
- Torque Specs

Reviews
There are no reviews yet.